Neodymium Magnet ,Products

Products Category

Flexible Magnet (44)

Neodymium Magnet (38)

Block (8)

Disc (6)

Cylinder (4)

Ring (7)

Arc (8)

Abnormity (2)

Holding magnets (3)

Holding Magnet (11)

Lifting Magnet (7)

CONTACT US

Name: Emily Yao
+86-571-87425955/87425230
+86-571-87425665
+86-13957145940
support@dowellmagnet.com
Add: 5/F, Building A, Fudi Yi Center, No. 1243 Mogan Road, Hangzhou, China
Dowellmagnet

Products > Neodymium Magnet

General Information

Neodymium permanent magnet material available in the early 1980s, is now widely used in motor (motor), speakers (speaker), toys (toys) and some electrical appliances (electron), and other products. Components for Nd2Fe14B. Have very high magnetic properties, the largest energy product (BHmax) higher than the ferrite 10 times more. Its own mechanical properties is also very good, cutting different shapes and bored. High-performance products of the highest temperature of up to 200 degrees Celsius. Because of its material content easily lead to corrosion, according to different requirements of different surface coating. (Such as plating Zn, Ni, Au, Epoxy, etc.)

Third-generation rare earth permanent magnet of Neodymium magnets(NdFeB) is a contemporary of the strongest magnets in the permanent magnet, it is not only a high residual magnetism, high coercivity, high-energy product, such as high cost performance characteristics, and easy processing into the Sizes, it exert very high forces and can attract each other through large distances making them very popular. It iis now widely used in aviation, aerospace, electronics, electro-acoustic, mechanical and electrical, instruments, meters, antenna, medical technology and other devices needed Wing magnetic field equipment, especially for developing high-performance, small size, light And updating of the various products.

Advantages of our Neodymium Magnet:

1. We are gradually improving and advanced the implementation of the "automatic scales casting - hydrogenation, steam-ground flour - the closure of pressure - for sintering" production methods.
2. Possession of advanced processing and production lines, all kinds of machines more than 3000 units to undertake various kinds of high-volume orders.
3. can be mass-produced ultra-small and very large magnet. If Φ1 mm or Φ180 mm, and so on.
4. have the most advanced surface treatment and plating production lines, chemical plating, electroplating, plating and organic compound phosphate spraying and treatment.
5. the use of advanced production technology of hypoxia excellent corrosion-resistant magnet production and mass production of high-performance NdFeB N45 above products. Mass production can supply sufficient magnetic radiation isotropic and anisotropy NdFeB magnetic ring.
6. based on the establishment of ISO quality system, and implementing the 6 sigma quality management thinking, and optimize the production process, reducing cost of the product.
7. advanced physics and chemistry laboratory and a strong R & D team as the production of high-performance, high-quality products strong guarantee.
8. a number of senior experts in related subjects in the research and production security, well-known research institutions and start cooperation on cross-cutting.

Magnetic characteristics:

Grades	Remanence Br		Coercive Force Hcb		Intrinsic Coercivity Hcj		Maximum Energy Product (BH)max		Curie Temp. TC	Temp. Coefficient TW
	Remanence Br		Coercive Force Hcb		Intrinsic Coercivity Hcj		Maximum Energy Product (BH)max		Curie Temp. TC	Temp. Coefficient TW
	T	KGs	KA/m	KOe	KA/m	Koe	KJ/m3	MGOe	℃	℃
N35	1.18-1.23	11.8-12.3	≥868	≥10.9	≥955	≥12	263-287	33-36	310	≤80
N38	1.22-1.28	12.2-12.8	≥899	≥11.3	≥955	≥12	287-310	36-39	310	≤80
N40	1.26-1.31	12.6-13.1	≥923	≥11.6	≥955	≥12	302-326	38-41	310	≤80
N42	1.28-1.34	12.8-13.4	≥923	≥11.6	≥955	≥12	318-342	40-43	310	≤80
N45	1.33-1.38	13.3-13.8	≥923	≥11.6	≥955	≥12	342-366	43-46	310	≤80
N48	1.38-1.42	13.8-14.2	≥923	≥11.6	≥955	≥12	358-390	45-48	310	≤80
N50	1.40-1.45	14.0-14.5	≥836	≥10.5	≥876	≥11	382-406	48-51	310	≤80
N52	1.43-1.48	14.3-14.8	≥796	≥10.0	≥876	≥11	398-422	50-53	310	≤80
N35M	1.17-1.22	11.7-12.2	≥868	≥10.9	≥1114	≥14	263-287	33-36	320	≤100
N38M	1.22-1.25	12.2-12.5	≥899	≥11.3	≥1114	≥14	287-310	36-39	320	≤100
N40M	1.25-1.28	12.5-12.8	≥923	≥11.6	≥1114	≥14	302-326	38-41	320	≤100
N42M	1.28-1.32	12.8-13.2	≥955	≥12.0	≥1114	≥14	318-342	40-43	320	≤100
N45M	1.32-1.38	13.2-13.8	≥995	≥12.5	≥1114	≥14	342-366	43-46	320	≤100
N48M	1.36-1.43	13.6-14.3	≥1027	≥12.9	≥1114	≥14	366-390	46-49	320	≤100
N50M	1.40-1.45	14.0-14.5	≥1033	≥13.0	≥1114	≥14	382-406	48-51	320	≤100
N33H	1.14-1.19	11.4-11.9	≥836	≥10.5	≥1353	≥17	247-270	31-34	330	≤120
N35H	1.17-1.22	11.7-12.2	≥868	≥10.9	≥1353	≥17	263-287	33-36	330	≤120
N38H	1.22-1.25	12.2-12.5	≥899	≥11.3	≥1353	≥17	287-310	36-39	330	≤120
N40H	1.25-1.28	12.5-12.8	≥923	≥11.6	≥1353	≥17	302-326	38-41	330	≤120
N42H	1.28-1.32	12.8-13.2	≥955	≥12.0	≥1353	≥17	318-342	40-43	330	≤120
N45H	1.30-1.36	13.0-13.6	≥963	≥12.1	≥1353	≥17	326-358	43-46	330	≤120
N48H	1.37-1.43	13.7-14.3	≥995	≥12.5	≥1353	≥17	366-390	46-49	330	≤120
N30SH	1.08-1.13	10.8-11.3	≥810	≥10.2	≥1592	≥20	223-247	28-31	340	≤150
N33SH	1.13-1.17	11.3-11.7	≥844	≥10.6	≥1592	≥20	247-271	31-34	340	≤150
N35SH	1.17-1.22	11.7-12.2	≥876	≥11.0	≥1592	≥20	263-287	33-36	340	≤150
N38SH	1.22-1.25	12.2-12.5	≥907	≥11.4	≥1592	≥20	287-310	36-39	340	≤150
N40SH	1.25-1.28	12.5-12.8	≥939	≥11.8	≥1592	≥20	302-326	38-41	340	≤150
N42SH	1.28-1.32	12.8-13.2	≥987	≥12.4	≥1592	≥20	318-342	40-43	340	≤150
N45SH	1.32-1.38	13.2-13.8	≥1003	≥12.6	≥1592	≥20	342-366	43-46	340	≤150
N28UH	1.02-1.08	10.2-10.8	≥764	≥9.60	≥1990	≥25	207-231	26-29	350	≤180
N30UH	1.08-1.13	10.8-11.3	≥812	≥10.2	≥1990	≥25	223-247	28-31	350	≤180
N33UH	1.13-1.17	11.3-11.7	≥852	≥10.7	≥1990	≥25	247-271	31-34	350	≤180
N35UH	1.18-1.22	11.8-12.2	≥860	≥10.8	≥1990	≥25	263-287	33-36	350	≤180
N38UH	1.22-1.25	12.2-12.5	≥876	≥11.0	≥1990	≥25	287-310	36-39	350	≤180
N40UH	1.25-1.28	12.5-12.8	≥899	≥11.3	≥1990	≥25	302-326	38-41	350	≤180
N28EH	1.04-1.09	10.4-10.9	≥780	≥9.80	≥2388	≥30	207-231	26-29	380	≤200
N30EH	1.08-1.13	10.8-11.3	≥812	≥10.2	≥2388	≥30	223-247	28-31	380	≤200
N33EH	1.13-1.17	11.3-11.7	≥836	≥10.5	≥2388	≥30	247-271	31-34	380	≤200
N35EH	1.17-1.22	11.7-12.2	≥876	≥11.0	≥2388	≥30	263-287	33-36	380	≤200
N38EH	1.22-1.29	12.2-12.9	≥915	≥11.5	≥2388	≥30	287-318	36-40	380	≤200
N30AH	1.08-1.15	10.8-11.5	≥804	≥10.1	≥2786	≥35	223-255	28-32	380	≤230
N33AH	1.14-1.21	11.4-12.1	≥852	≥10.7	≥2786	≥35	247-279	31-35	380	≤230

Production Chart of Sintered NdFeB:

Raw material →Mixing Vacuum → Melting Powder →Production →Cutting and Grinding →Testing →Vacuum Sintering →Molding →Surface Coating →Inspection →Packing →Shipping →After-sales Service